SPORTident Config+ Changelog

Updated Danish, French, Italian, Japanese, Hungarian, Portuguese, and Russian translations. A big thank you to our translators!

Includes the updated firmware package 2021.03.09

Installer is now multilingual

Config+ and firmware update checks are working again on Windows 7 as well

None

The SPORTident USB driver can now be installed from the "Help" menu

Updated Chinese, Spanish, French and German translations

The "Open help" (F1) menu item now opens the online SPORTident User Guide in a browser

Build the installer with WiX toolset instead of Advanced Installer

Automated build (GitHub Actions) of Config+, the installer, the firmware package and the update packages of Config+ and the firmware package

ConfigPlusPortable now always looks for the ConfigPlus binary and for the app data in the correct location

Correctly log infos at program startup

Installer is currently English only, not multilingual

None

Support BSF9 devices with firmware 656

Ship firmware package with Config+ (previously it was only included in the portable version of Config+)

Automated build of Config+ with GitHub Actions

Config+ and firmware update checks are working again

We no longer offer to install the SPORTident USB driver during setup

The AppData directory name is now ConfigPlus instead of Config

CONFIG-537: support BSF9 and BSM9 devices

None

None

None

CONFIG-534: improve support for FW700 BS8

None

CONFIG-534: support FW700 for BS8

None

None

None

None

CONFIG-536: fix handling of read card list view

None

CONFIG-533: Improve firmware update files support

CONFIG-528: personal data fields for SI-Card5 could contain data although these fields are not supported

None

CONFIG-525: Improve BS11 FW700 support

CONFIG-526: tool tips for code number optimized

CONFIG-530: Message box for XML file trimming did not offer the proper buttons

None

CONFIG-524: Improve support for SIAC signal indicator

None

None

CONFIG-521: Support station switch off after write for BS11 FW700

CONFIG-522: Additional improvements to adapt to BS11 FW700

CONFIG-523: Allow station switch off after write for BS11 FW700

None

BS11 FW700 and later supported

CONFIG-493: Allow BS11 display to be flipped

CONFIG-505: Recommend operating time of 10 minutes for BC Slave

CONFIG-517: Show device temperature for BS11 FW700 and later

CONFIG-520: Prevent SI-GSMDN FW111 to start firmware update

CONFIG-519: Disable "Set baudrate" command when target device is remote

None

None

CONFIG-516: Battery voltage for BS11 is not shown in all cases

None

None

CONFIG-515: SI-Card cannot be personalized in specific scenario

None

CONFIG-513: Improve support for new firmware releases

CONFIG-514: Improve support for new firmware releases (2)

None

None

CONFIG-511: Support factory reset for Golfbox

CONFIG-510: System memory of Golfbox could be written in wrong way

None

CONFIG-506: New application logo

None

None

CONFIG-503: Show battery voltage of GSMDN

CONFIG-504: BS11 red display of voltage should reach down to 2.5 Volts

CONFIG-508: Application randomly crashes when personalizing SI-Cards

None

None

CONFIG-499: Fix several translation issues and missing UI elements

CONFIG-501: Operating time of 95:59:00 is mistakenly changed to 95:00:00

CONFIG-502: Operating time of BS11 FW < 700 is not set properly

None

CONFIG-492: Reset BS11 settings when upgraded to FW700

CONFIG-495: Default BS11 beacon mode should be Punching mode (for factory reset)

CONFIG-496: Assign keyboard shortcut for 'Reset factory default'

CONFIG-497: Show battery capacity in device overview panel

CONFIG-498: Reading the very first device settings fails to identify a BS11 BS as loop antenna by serial number list

CONFIG-494: new firmware update package for FW657 released

None

None

None

None

CONFIG-490: Direct operating modes are not allowed on BS11 FW700 but where still offered

CONFIG-491: Setting should be shown for a device even if the operating mode is not allowed

CONFIG-327: Support new hardware identifiers for BS11 devices

CONFIG-454: Support new memory layout for BS11

CONFIG-479: Support SPORTident Printer

CONFIG-438: Add warning message for CN other than 1 for operating mode CLEAR

CONFIG-448: Several improvements to the session dialog

CONFIG-482: Update layout of printout station to support SPORTident Printer

CONFIG-483: Factory reset for SPORTident Printer supported

CONFIG-485: Update layout XML file for printout station to support SPORTident Printer

CONFIG-487: Capitalize all operating mode phrases

CONFIG-488: Rename Go4o related contents to O-Starter

CONFIG-489: Add firmware support for O-Starter devices

CONFIG-478: Course list is not cleared when a new device is connected

None

None

CONFIG-476: SI-Card cannot be deleted from the read card list

CONFIG-477: Firmware update for Golfbox2 via HID interface does not work

None

None

CONFIG-475: Export current view crashes the application

CONFIG-469: Support Golfbox course read and write via CDC interface

CONFIG-467: Support Golfbox HID interface

CONFIG-370: Communication with station is handled asynchronously now

CONFIG-377: Significantly improved speed of UI when reading large lists of SI-Cards

None

CONFIG-469: Support Golfbox course read and write via CDC interface

None

None

CONFIG-460: Support Golfbox settings via CDC interface

CONFIG-461: Support Golfbox course description via CDC interface

CONFIG-457: Possibility to allow duplicates in configure cards view

CONFIG-468: Improve battery warning level for BS11

None

None

CONFIG-411: reduce possibilities to set "legacy protocol" for some operating modes

CONFIG-453: SI-GSMDN: standby time will be set to maximum

None

None

None

CONFIG-463: Application crashes with FormatException when exporting full card detail list on Danish computer

CONFIG-464: Backup memory of readout stations is not parsed correctly for some SI-Card6

CONFIG-465: Serial number for SRR dongle could be wrong

None

CONFIG-462: Include new serial numbers for loop antenna detection

None

None

None

CONFIG-459: Battery voltage label could display wrong values for BS7/8

None

CONFIG-444: Allow Beacon operating for BS7-P and BS7-S

CONFIG-456: Prevent misconfiguration of later BS11 firmware versions

CONFIG-450: Application could crash when reading malformed backup memory block

None

None

CONFIG-446: Application crashes when reading SI-GSMDN

CONFIG-447: Device protocol file does not contain all information anymore

None

CONFIG-441: Grading of vital parameters for SPORTident devices has been moved into Communication library

CONFIG-440: Reading a device with a unsupported operating mode could lead to UI problems

CONFIG-442: Personal data from SI-Card was not displayed anymore

CONFIG-443: Starting the application, the welcome screen was not centered

CONFIG-445: Reading the backup memory of a station could lead to a crash

None

CONFIG-439: Firmware update improvement for Golf box 2

None

CONFIG-435: Support for Golfbox 2 added

CONFIG-406: Limited changes to SI-GSMDN device settings to experts only added warning message for wrong configuration, added factory reset feature

CONFIG-433: SIAC clear counter is checked for reasonable values

CONFIG-415: Application crashes when reading backup memory created by SportOrg software

CONFIG-419: Printout station baudrate warning is shown even when the printout station is programmed remotely

CONFIG-429: Download of program and firmware update does not work on Windows XP, removed this feature on Windows XP machines

CONFIG-430: SIAC Feedback setting fails with exception "InvalidOperationException"

CONFIG-431: Empty line in log file when the very first log entry of the day was written

CONFIG-432: SI-GSMDN could not be read in some cases

CONFIG-434: Crash during backup reading of readout station

CONFIG-417: Support firmware update for Golf box

CONFIG-413: Reading SI-Card8 and 9 now always reads both blocks

CONFIG-414: Improve performance for test view window

CONFIG-412: Backup memory readout of a printout station ignores the mass start time

CONFIG-418: Serial number range for GOLFident devices is wrong

None

CONFIG-410: The operating mode 'SIAC Test' should allow AIR+ settings to be changed

None

None

CONFIG-407: SI-Card 10/11 Block 3 is now always read

CONFIG-409: Warning message is shown when a station is programmed as BC_Finish

CONFIG-408: Printer margins could not be set when printing card details

None

CONFIG-400: checking and correcting some SIAC settings automatically

CONFIG-401: Clear, Clear reserve and Check are intelligently displayed

CONFIG-405: Clock view can now be opened without checking the devices settings

CONFIG-344: Fixed writing personal data

CONFIG-395: SI-Card6 with special serial number could not be read

CONFIG-397: SI-GSMDN: Last block of volatile memory was not read properly

CONFIG-398: Card.ControlPunches.TimeSi did not contain sub seconds

CONFIG-399: Some battery values from the backup memory of SIAC battery test were not parsed properly

CONFIG-403: Auto apply with First name = SIID doesn’t work

CONFIG-404: SIACs could not be read when battery voltage was below 2.5 volts

CONFIG-25: Now the template of printout station is preserved during firmware update

CONFIG-287: now showing a message on first startup after the update of Config+ was successful

CONFIG-356: Disabled operating time for BSM8 (mini reader) as it does not make sense

CONFIG-358: SI-Card is now always read before it is configured

CONFIG-372: Improved device protocol file (removed obsolete columns and added new settings)

CONFIG-381: now reading and parsing past the punch pointer when reading SI-Cards

CONFIG-384: Improved support for SIAC RSSI (signal indicator)

CONFIG-391: Mass start time from printout station is shown, can be cleared and is written to the export protocol when writing a full card detail file from the backup memory of the printout station, CSV file is now written with region specific field separator

CONFIG-369: Battery voltage was showing wrong values for BS11 with FW > 320

CONFIG-382: User could click auto apply although no card config setting was checked

CONFIG-383: Personal data of ComCardUp were not parsed correctly

CONFIG-385: Reading SI-GSMDN with corrupt system memory could crash the application

CONFIG-390: In the backup view, F5 did not "re-read" the backup as expected

CONFIG-392: SIID was not always written to the SI-Card, when "First name = SIID" was checked

CONFIG-393: Event log of operating system could be flooded when logger is not able to log to the application log file

None

None

CONFIG-374: application could crash when connected device did not reply to reading system data or setting master mode (jSh.Radio support improved)

CONFIG-378: fixed target device button was disabled for new serial number range of BS7/8 devices

None

CONFIG-371: advanced settings are unchecked by default when enabled

None

CONFIG-365: implemented support for BSF8 go4o station

CONFIG-362: write address confirmation from station was not verified properly

CONFIG-363: included new station serial number ranges

CONFIG-359: fixed config card view UI misbehavior

CONFIG-360: fixed target device state getting lost when device is reconnected in read backup view

CONFIG-361: after clearing the backup memory, switching to backup view did not re-read the backup memory

CONFIG-364: fixed adding sub seconds to empty punch records

CONFIG-366: empty punch records are displayed with sub seconds

CONFIG-367: fixed card personal data encoding for Chinese Simplified

None

None

CONFIG-357: Changing personal data in SIAC could reset battery date in some cases

None

None

CONFIG-355: Personal data cannot be read or written for ComCardUp

None

None

CONFIG-347: Personal data for never SI-Cards was not read properly in some cases

CONFIG-348: Battery service could reset advanced station settings

CONFIG-349: Tab order for personal data fields fixed

CONFIG-350: CharacterSet 'Chinese simplified' not allowed for SI-Cards except Card11 and SIAC

None

general improvements to all supported translations

CONFIG-291: Warning shown, when controls should be programmed with a code number higher than 255 (causes problems with SI-Card5)

CONFIG-326: product "BS11 loop antenna" is explicitely supported

CONFIG-343: Additional line separates operating mode "Read SI-Card" for better visibility

CONFIG-333: fixed several problems with localization

CONFIG-338: Exception could be thrown when exporting list in config card view

CONFIG-340: Switching from read card view to view punch view without success closes connection

CONFIG-341: Switching to read cards view does not show card details for highlighted list item

CONFIG-342: Arrow keys do not work properly in the read card list

CONFIG-331: New operating mode available: SIAC Test

CONFIG-334: Support SIAC AIR+ signal indicator

general improvements to all supported translations

CONFIG-272: Station will beep when it is woken up during communication to perform battery measurement

CONFIG-328: Settings only the time to a station will now perform a beep

CONFIG-337: Special characters in card personalization not displayed properly

None

general improvements to the UI for multi language support

CONFIG-313: Crash when opening the about dialog

CONFIG-317: BS11 BS allowed operating mode BC_Slave

CONFIG-318: Header for SI-GSMDN backup memory list was not translated

CONFIG-319: Several issues with localization

CONFIG-89: Support l10n (multi language)

CONFIG-1: Personalise cards now possible in "Config card" view

CONFIG-111: Support printer specific conversion of extended ASCII character set

CONFIG-292: Check and fix SIAC block identifier if required

CONFIG-293: Check and fix SIAC ALF-ON time if required

CONFIG-297: Logger performance improved

CONFIG-282: After programming remotely, the main station will be set to direct automatically

CONFIG-289: Improved device protocol log file

CONFIG-295: Side assemblies are now integrated into the main assembly (less files in applications folder)

CONFIG-301: Merged Common and Communication library for better maintenance

CONFIG-312: Detail panel width is stored separately for views "Read card" and "Config card"

CONFIG-290: Battery test prior to reading block 3 is now optional

CONFIG-257: Changed some events to be triggered asynchronously

CONFIG-273: Advanced setting remains checked/unchecked, after this setting was disabled for a operating mode

CONFIG-288: Firmware update information could be overwritten by a second instance

CONFIG-294: View punch for SI-GSMDN required handshake mode to be 'autosend', which was not checked

CONFIG-305: File logger could not log to Windows application event log

CONFIG-311: Block 1 for personal data was not read in some circumstances

CONFIG-280: No need to toggle baudrate for BS11, SI-GSMDN and Dongle

CONFIG-307: Clear backup command was available for SI-GSMDN although the device does not support this

None

None

CONFIG-285: Cannot set operating times higher than 01:35:00 in the text box

CONFIG-284: Some keyboard shortcuts work even when the command is disabled

CONFIG-286: Progress overlay window is showing as "FormProgress" in window switch view

CONFIG-220: Support backup memory reading for SI-GSMDN

CONFIG-251: Support device on/off for SI-GSMDN

CONFIG-252: Baudrate 38400 is restored for BSM7-RS232 after firmware boot

CONFIG-263: Fixed battery warning thresholds according to battery test station

CONFIG-264: Extended battery usage statistics in test mode

CONFIG-265: Improved card reading mechanism for SI-Card6 with corrupted pointer

CONFIG-268: Default operating time for SI-GSMDN is now 96 hours

CONFIG-271: Warning shown, when code number and operating mode do not follow the recommendations

CONFIG-272: Initialize battery measurement for a station waking up from standby mode when reading

CONFIG-274: When invalid operating time is entered, UI feedback is improved now

CONFIG-253: Fixed wrong settings reading for some SI-GSMDN settings

CONFIG-254: Fixed update check reading wrong remote produt information

CONFIG-255: Fixed application crash when updating the firmware on SI-GSMDN with HID interface

CONFIG-256: Fixed application window not flashing after config card executed successfully

CONFIG-258: Fixed column width not adjusting when 100+ items are in list

CONFIG-261: Fixed tCard print details layout being messed up

CONFIG-266: Fixed autosend setting not being available in some BS11 operating modes

CONFIG-270: Fixed application window not being movable during firmware boot

CONFIG-275: Fixed keyboard shortcuts being processed although the application window was not in focus

CONFIG-277: Fixed backup reading initialization

CONFIG-279: Fixed "show release notes" link label not working properly

CONFIG-250: detect non updateable devices and improve firmware boot for SI-GSMDN

None

CONFIG-243: changed CommonFolderPickerDialog as it caused problems with high dpi displays

CONFIG-246: firmware upgrade SI-GSMDN firmware 1.0 and higher supported

None

None

None

CONFIG-242: clear_r will be explicitly shown in the full card readout export file

CONFIG-248: additional check introduced for devices and firmware versions that are capable of a firmware upgrade

CONFIG-241: program could crash when trying to perform firmware update after a new device battery has been installed

CONFIG-247: reading a device remotely and getting a direct reply did not properly switch from "Remote" to "Direct

None

None

CONFIG-234: progress bar hid parts of the text in progress window

CONFIG-235: firmware update check reported a false error in some situations

CONFIG-237: Full card export showed invalid date for empty records for tCard

CONFIG-238: SRR dongle configuration could get destroyed when applying the settings

None

CONFIG-229: export dialog now keeps last action and save path

CONFIG-227: autoincrement code number checkbox is now not checked by default and the setting will now be kept over an application restart

CONFIG-98: get and set device time in "Clock" view now also reads the device system memory and creates a log entry

CONFIG-230: view punch now also allows to open the dialog when device does not respond to standard communication protocol

CONFIG-228: fixed some situations where the application could crash when reading the backup memory of a device

CONFIG-226: capacity bar was showing for the mini reader

CONFIG-231: main form was not always in focus when progress dialog closed

CONFIG-232: getting/setting device time while changing device settings created two log entries

implemented support for SI-GSMDN (COM and HID interface)

supports settings for SRR Dongle with firmware 450

changed battery consumption view to a "estimated remaining battery capacity view", counting down from 100 %

portable Version does not allow to install update from update check dialog anymore to provide accidential full install of the application

the settings for "do not show again" in dialogs are now kept over an application restart

reduced timeout for response when measuring SIAC battery to 1000 ms

now showing a warning message when readout station should have autosend enabled

view punch is now also available for stations in operating modes "SIAC on", "SIAC off", "SIAC battery test", "SIAC radio readout"

now hiding battery voltage for USB stations as this value is not accurate

now forces to set the flag 'SI-Card6 with 192 punches' for operating mode 'Clear' to always fully clear SI-Card6

now showing production date for SI-Card10/SI-Card11/SIAC in read card details

now correcting tCard punch year automatically

progress bar now turns yellow to indicate a communication problem

reduced retry count for read card block from 5 to 3

made 'Config card' view available as a toolbar button

'Sync device time with computer' in new battery dialog is now checked by default

command to clear printout station template available

improved dialog asking to change the operating time

improved logging of SRR Dongle and GSM-DN devices

fixed "view punch" view not opening because it was forcing some settings for a SRR dongle that are not supported by its firmware version

fixed: "Config cards" view did not work properly when details panel was hidden in "Read cards" view

fixed setting the time (for a station after a firmware update) not being accurate enough when there were communication problems with the station

fixed problems when two or more HID devices are connected at the same time

fixed: device log file date did not follow when the application was running over midnight

fixed crash on Windows XP systems when a stations settings was read

fixed: export full card readout list could export an empty list

fixed: some firmware files were falsely rejected

fixed: 'Config card' view not opening after station settings were fixed

fixed: station did not beep after new battery has been set

fixed: check for firmware update did not refresh the current firmware view

fixed: 'Config card' listed the card twice after setting the feedback signal

None

new selective feedback default values (for SIAC and Card11)

new battery dialog will start with a battery usage of 0%

battery low threshold for SIAC is checked and fixed on card readout if required

BC_Check record (SIAC >= SW4.3) is evaluated properly

added 100ms pause between SIAC battery measurement and block 3 read command

fixed a problem where the operating time could be set falsely in the station

fixed HID dongle disappearing in the list view when another USB device was connected

fixed possible application crash on startup when the application settings file was corrupt

fixed possible application crash when the log directory has not been created yet

fixed "Show device log file" menu item not showing an error message when the log file could not be found

fixed "LogFileRetentionPolicy" setting having no effect

fixed portable wrapper not forwarding all command line parameters

None

fixed SI-Card6* not read properly when more than 64 punches

None

consumed battery capacity can be set up to 500 %

when reading a card, block read retry count has been increased to 5

Clear backup will now also clear the list of the backup content

"do you want to program the main station" will now be the first question

fixed list view values of special card types in devices backup memory

fixed taskbar progress remaining at 100% after a task completed successfully

fixed: programming a main or printer station remotely asked for "do you really want to program the main station"

fixed NullReferenceException when reading SIAC in Config card mode

fixed: export dialog was shown as a separate windows in the task bar

fixed: firmware boot for BSF8-SRR shows and validates against wrong firmware image (but boots correct one)

fixed: battery capacity value being destroyed when programming station in batch

None

None

fixed battery capacity value not being kept when reprogramming a device

fixed showing the legacy protocol warning for BS11 in some configurations

None

None

included new HID library that fixes the recognition of multiple connected HID devices

program did not start up on Windows earlier than Windows 7 (due to new taskbar progress indicator)

backup memory reading of readout station implemented

backup memory reading of printer station implemented

backup memory reading of SI-Master station implemented (for > FW595)

generally improved card readout

now trying 5 times to boot firmware after the image has been transfered (was 3 previously)

increased response wait time for SET_MS_MODE to 800 ms

corrected some spelling mistakes

export full card list writes empty values at 'Hardware version', 'Software version', 'Clear count', 'Character set' for Card10 because they are not applicable for this card type

export full card list now writes the card punching pointer at 'No. of records' instead of the count of found valid records (they can differ)

improved Card6 and Card6* readout: does not rely on autosend blocks anymore, makes readout faster. now ignores "Card6 with 192 punches" setting and .always reads a card depending on its punching pointer

SI-Card11 does not show voltage anymore

some UI cleanup

if an unhandled exception occurs, the application does not crash after the error dialog anymore

program did not start up on Windows earlier than Windows 7 (due to new taskbar progress indicator)

new device battery mode did not work properly

connection indicator icon sometimes displayed active connection when the connection was already closed

factory reset for main station did not finish properly

Card5 and Card6 owner data was not parsed correctly

export dialog: file path text box was limited to 50 characters only

cancelling a process in the UI did not always stop all corresponding threads

Service mode implemented

Config card mode implemented

trying to read device settings with "communication failed" result now allows to "retry"

improved card readout for Card5

introduced some additional checks before starting the firmware update (booting same version, voltage check)

default operating time for SIAC on/off/battery check/radio readout is 10 minutes

removed eco mode setting for BS7/8 (no longer valid)

merged SIAC special functions into operating mode combo

advanced settings are now collapsible

inverted meaning of extended protocol flag, is now called 'legacy mode'

progress dialog did not always have focus

escape key closes progress dialog when progress has completed (successful or with errors)

showing error message when the device protocol file cannot be written

when the progress dialog is shown, the window is now movable

supporting not initialized SIACs

added switch off instruction in command menu

added some keyboard shortcuts for some commands

device protocol file does not contain formatting for battery capacity anymore

clear_r record displayed instead clear when reading SIAC/Card10/Card11

log files will be removed after 30 days

device log file will be split by date

changed "not available" icon

reading and writing configuration as default from/to the device will now be logged as "ConfigReadAsDefault" or "ConfigWrittenAsDefault" in device log file

cancel firmware upgrade will now ask for confirmation

taskbar progress indicator implemented

fixed: switching back to the settings view after firmware update still showed previous device

fixed: start number not being read when reading Card5

fixed: check record code number being wrong when reading Card6

fixed: 'Check for update' on the firmware panel did not update the information on the current view

fixed: program did not recognize when the system time zone has changed while it was running and set the time incorrectly

fixed: connection was accidentally closed when receiving SIAC init record in view punch panel

fixed: some debug flags did not work as expected

fixed: if a card read was incomplete (does not appear in the list) and card duplicates where not allowed, it could happen that the card cannot be read again

fixed: EcoMode settings were not always overwritten when they contained invalid values

fixed: for some SRR dongles, a backup memory value was displayed

fixed: some SI-Card6 could not be read if they contained a damaged punching pointer

fixed: some SIAC v3.2 displayed false subseconds

fixed: firmware update check did not work properly when running portable version

firmware update check implemented

firmware download implemented

firmware boot to devices implemented

SIAC > FW400 readout with subseconds supported

changed program icon

fixed default button not being selected on some message boxes

tooltip of item text for device list

popup delay for toolbox (quick help) changed to 1 second (was 0.5 seconds)

SRR dongle: when < FW312, protocol combo box default value is now "extended protocol"

card readout: Card10 does not read block 3 anymore

improved card readout of faulty card records

improved reading of faulty backup memory records

improved card details printout, printer selection from preview dialog is now possible when printing

improved performance for view punch list when doing SIAC radio readout

improved information display for view punch list

log file improvements

added some system memory values that will be written when doing a factory reset on the device

main window minimum size set to 640x480 px

added some hints for senseless settings combinations

fixed: error dumps where not written to application log path

fixed: auto download and install routine did not work on Windows XP

fixed: programming a BS11 from a beacon mode with radio flags enabled to a direct mode could lead to a station that does not turn on anymore

fixed: GetTime instruction was not correct (but still working) [thanks to Simon Harston]

fixed: SRR Dongle >= FW312, protocol combo box was still disabled when a dongle < FW312 was read before

fixed: some SI-Card6 could not be read properly

fixed: sometimes when reading a card has failed, the connection could be closed and you would need to close and re-open the card read view to establish the connection again

fixed: some menu item had no function

fixed: some messages boxes did not center on parent form

fixed: Card6* card readout

fixed: export dialog, default extention for file selection dialog was XLSX, should have been CSV

several additional fixes

read cards implemented

view punch implemented

file export from various lists implemented

default settings feature implemented

default target device is now "remote" (when available)

[Enter] key will apply settings to device

several improvements

several new settings are saved

support BS11 >= FW330 'AllowGateMaster' setting

fixed backup memory view: SIID sorting was not numeric

fixed backup memory view: first column now shows backup memory index

fixed backup memory view: for backup memory errors, day of week or date is available but was not displayed

fixed update check: dialog was displayed when auto update check completed with result NoNewVersionFound

fixed: set time could lead to a crash when the device calendar was faulty

fixed: clear backup only cleared direct connected device backup

fixed: Memory leak when reading/programming many stations (OutOfMemoryException)

several additional fixes

program update check

UI improvements

many fixes

set new device battery

forth test release

mainly UI improvements

many fixes

third test release

many fixes

second test release

read punch backup memory (extended mode) → progress reporting, resuming

read battery test backup memory (extended mode)

read remote device

write remote device

BS11 BS/BL: BC_START, BC_FINISH allow Punching mode to be set/unset

many fixes

first test release

None

None